2024-03-29T16:58:42Z
https://www.jcema.com/?_action=export&rf=summon&issue=15706
Journal of Civil Engineering and Materials Application
J. Civ. Eng. Mater. Appl.
2676-332X
2676-332X
2020
4
3
Iranian Eocene Green Tuffs as Natural Pozzolan for Use in Cement Industries
Jafar
Sobhani
Ali Reza
Pourkhorshidi
Fariborz
Masoudi
Eocene Green Tuffs are widespread in Central Alborz in the north of Iran. In parts, they are used as natural Pozzolan. In this study, the Pozzolanic activities of tuff samples from Qazvin to Semnan in Alborz Mountain were examined. The Pozzolanic activity patterns vary in different beds and even change laterally. Chemical examination of the samples indicated that they all belong to acidic rock group and were consistent with related standards. Pozolanic activity calculated for samples using hydraulic factor, thermal analysis and ion concentrations. Data obtained based on thermal analysis, presented a range of Pozzolanic activities for tuffs with similar chemistry and appearance. It was found in this research that mineralogy and texture controlled Pozzolan activity. Tuffs with high activity had glass in their matrix, but weathering and recrystallization reduced the activity. Petrographical examinations play an essential role in evaluating the availability of tuffs as natural Pozzolan in Central Alborz.
Natural Pozzolan
Petrography
Pozzolanic Activity
Alborz Mountains
Iran
2020
09
01
133
140
https://www.jcema.com/article_109972_df43e47f9117c8744614ce831ecc2ec6.pdf
Journal of Civil Engineering and Materials Application
J. Civ. Eng. Mater. Appl.
2676-332X
2676-332X
2020
4
3
Effect of Fluid Viscous Damper parameters on the seismic performance
Soheila
Kookalani
Dejian
Shen
Energy dissipation devices are widely used to enhance the response of structures subjected to dynamic loads caused by wind and earthquake. Especially, viscous dampers are hydraulic devices widely used in structural engineering that dissipate mechanical energy by producing a damping force against the motion. The dampers can mitigate transversal and longitudinal or vertical displacement. It can be set up in different kinds of structures. This study is aimed at comparing the impact of various Fluid viscous damper parameters on the structures under the earthquake. To this aim, a seven-story steel frame structure retrofitted with fluid viscous dampers was considered for analyzing with a variety of parameters. The results showed that installing longitudinal nonlinear Fluid viscous damper can reduce the seismic response significantly, by selecting affordable damping parameters including stiffness, damping coefficient, and velocity exponent. The optimum damping parameters can be calculated accurately by analyzing structure with different damping parameters of nonlinear Fluid viscous damper.
Damper parameters
damping force
damping coefficient
Velocity exponent
Seismic Performance
2020
09
01
141
153
https://www.jcema.com/article_113718_25c3dc9ca7af226a4f35e797e69b788f.pdf
Journal of Civil Engineering and Materials Application
J. Civ. Eng. Mater. Appl.
2676-332X
2676-332X
2020
4
3
Fourier Transform Infrared Characterization of Construction Joint Sealants
Aschalew
Kassu
Kwaneitra
Powers
William
Petway
Anup
Sharma
This paper presents the results of the FTIR (Fourier-Transform Infrared) spectroscopy study of commercially available silicone-based sealant materials commonly used for sealing voids, cracks, and joints in non-structural building components of commercial and residential buildings. The sealants prevent moisture leakage through the parts, making the building envelope air and water-tight, sustainable, and energy-efficient. FTIR spectroscopy is a widely used technique in characterizing pharmaceutical products, mineralogical compositions, forensic analysis, food, chemical, semiconductor, petroleum, and agro-industries. This work demonstrates the application of FTIR analysis in the study of construction materials. It reports the IR (Infrared) spectral signatures of the selected building joint sealants used in the construction industry. It is found that several IR bands are common to most of the samples, suggesting that there is a reasonable similarity in the molecular composition of the three different manufacturer brands, including DAP (Dicks-Armstrong-Pontius), GE (General Electric), and HDX (Home Depot Product). Despite the multiple similarities in the IR bands of the samples studied, the FTIR techniques provided enough evidence to distinguish the samples and suggest that the composition and molecular structures of most of the silicone brands possess unique IR signatures.
FTIR analysis of building materials
Joint sealant
Characterization of construction materials
FTIR bands of building sealants
Characterization of silicone sealants
2020
09
01
155
160
https://www.jcema.com/article_113719_834f5b98582cc433f2fbaf7d7e3080d9.pdf
Journal of Civil Engineering and Materials Application
J. Civ. Eng. Mater. Appl.
2676-332X
2676-332X
2020
4
3
Comfort Level Investigation of Chromite Composite Floor System under Human Walking Load
Farhad
Abbas Gandomkar
Mona
Danesh
This paper's main objective is to determine the comfortableness of a composite structural floor system known as Chromite. For this purpose, twenty-eight Chromite panels were developed via the Finite Element Method (FEM) to find their Fundamental Natural Frequency (FNF). Then, the studied panels are categorized as Low-Frequency Floor (LFF) or High-Frequency Floor (HFF) regarding to their FNFs. Peak accelerations of low and high-frequency panels and also static stiffness of high-frequency panels were determined and compared with the limit value affirmed by the American Institute of Steel and Construction (AISC). Effects of various parameters were determined on changing FNF and also peak acceleration and static stiffness of the studied panels, depend to kind of panel as LFF or HFF. The results demonstrated that although some factors decreased and increased peak acceleration and static stiffness of the Chromite system, respectively, the panels could reach high vibration levels resulting in lack of comfortableness for users. In addition, the results show that the Chromite floor system needs to improve to be comfortable for users.
Chromite floor system
comfortableness
human walking load
static and dynamic response
low and high frequency floor
2020
09
01
161
177
https://www.jcema.com/article_113720_2c573e7030c576b3c76d8b0ad2a6b2d2.pdf
Journal of Civil Engineering and Materials Application
J. Civ. Eng. Mater. Appl.
2676-332X
2676-332X
2020
4
3
Evaluation of Liquefaction Hazards in Soil Layers along Tabriz Metro Line 1 based on Practical Methods
Rouzbeh
Dabiri
Sadaf
Mahmoudi Azar
Settlements in the ground and deep soil layers can occur after the liquefaction phenomenon—these deformations damage structures, buildings, and lifelines. Several practical methods have recently been proposed based on fields and laboratory data for evaluating volumetric strain (settlement) and maximum shear strain due to liquefaction. The present study mainly aimed to compare liquefaction potential assessment findings in terms of risk intensity and settlement values of soil layers after liquefaction using Standard Penetration Test (SPT) and Energy Methods along Tabriz Metro Line 1. Thus, 31 boreholes along the path were selected in this regard. Then, the liquefaction potential of soil layers was assessed based on the above-mentioned methods, and the liquefaction potential risk index was determined as well. Finally, the settlement value of soil layers was evaluated according to the two proposed methods' findings. The findings showed that both processes were relatively correlated, and the energy method proposed higher liquefaction potential risk compared to the SPT procedure.
Energy
Liquefaction
Settlement
Standard penetration test
Tabriz Metro Line 1
2020
09
01
179
193
https://www.jcema.com/article_113721_0b7595fdbe14013f45e1e9abbbba03df.pdf