Keyword Index

A

  • ABAQUS Investigate Effect of the Parameters Compressive on Behavior of Concrete Filled Tubular Columns under Fire [Volume 3, Issue 3, 2019, Pages 131-142]
  • Adhesion Investigating the Effect of Nanoclay Additives on the Geotechnical Properties of Clay and Silt Soil [Volume 3, Issue 2, 2019, Pages 63-74]
  • Axial compressive capacity Investigate Effect of the Parameters Compressive on Behavior of Concrete Filled Tubular Columns under Fire [Volume 3, Issue 3, 2019, Pages 131-142]

B

  • Bearing Capacity Probabilistic analysis of bearing capacity of strip foundations overlying reinforced embankments [Volume 3, Issue 3, 2019, Pages 167-179]
  • Behavior properties Effect of thermal stabilization of soil, bentonite, calcium carbonate and fibers on behavior properties of clay soil [Volume 3, Issue 1, 2019, Pages 53-62]
  • Bentonite Effect of thermal stabilization of soil, bentonite, calcium carbonate and fibers on behavior properties of clay soil [Volume 3, Issue 1, 2019, Pages 53-62]

C

  • Calcium Carbonate Effect of thermal stabilization of soil, bentonite, calcium carbonate and fibers on behavior properties of clay soil [Volume 3, Issue 1, 2019, Pages 53-62]
  • CFST Column Studying the buckling behavior of composite columns (CFST) by cyclic loading [Volume 3, Issue 4, 2019, Pages 213-226]
  • Composite Column Seismic behavior of steel-concrete composite columns under cyclic lateral loading [Volume 3, Issue 4, 2019, Pages 181-194]
  • Compressive strength Application of SVM for investigation of factors affecting compressive strength and consistency of geopolymer concretes [Volume 3, Issue 2, 2019, Pages 95-101]
  • Compressive strength Evaluation of durability behavior of geopolymer concrete containing nano-silica and nano-clay additives in acidic media [Volume 3, Issue 3, 2019, Pages 157-165]
  • Compressive strength Effect of Hybrid Fibers on Water absorption and Mechanical Strengths of Geopolymer Concrete based on Blast Furnace Slag [Volume 3, Issue 4, 2019, Pages 195-211]
  • Concrete filled tubular Investigate Effect of the Parameters Compressive on Behavior of Concrete Filled Tubular Columns under Fire [Volume 3, Issue 3, 2019, Pages 131-142]
  • Concrete gravity dam Investigation into the effect of bed stiffness on seismic performance of concrete gravity dam under far- and near-field earthquakes [Volume 3, Issue 1, 2019, Pages 40-52]
  • Corrugated plate Effect of opening location in the wall with corrugated steel plate using the pushover analysis [Volume 3, Issue 2, 2019, Pages 75-85]
  • Cracking Effect of Using Different Fibers on Slab on Grades [Volume 3, Issue 2, 2019, Pages 86-94]
  • Crash Prediction Modeling of Road Accidents Using the Model of I Interactive Highway Safety Design (Case Study: Roads of Qazvin, Zanjan and Hamadan) [Volume 3, Issue 1, 2019, Pages 18-30]

D

  • Dam Behavior Investigation into the effect of bed stiffness on seismic performance of concrete gravity dam under far- and near-field earthquakes [Volume 3, Issue 1, 2019, Pages 40-52]

E

  • Excavation The effect of non-simultaneous excavation of closely-spaced twin tunnels on ground surface settlement [Volume 3, Issue 1, 2019, Pages 31-39]

F

  • Fiber Reinforced Geopolymer Concrete Effect of Hybrid Fibers on Water absorption and Mechanical Strengths of Geopolymer Concrete based on Blast Furnace Slag [Volume 3, Issue 4, 2019, Pages 195-211]
  • Fire Investigate Effect of the Parameters Compressive on Behavior of Concrete Filled Tubular Columns under Fire [Volume 3, Issue 3, 2019, Pages 131-142]
  • Flexural Strength Effect of Hybrid Fibers on Water absorption and Mechanical Strengths of Geopolymer Concrete based on Blast Furnace Slag [Volume 3, Issue 4, 2019, Pages 195-211]
  • Fly ash Application of SVM for investigation of factors affecting compressive strength and consistency of geopolymer concretes [Volume 3, Issue 2, 2019, Pages 95-101]

G

  • Geopolymer Evaluation of durability behavior of geopolymer concrete containing nano-silica and nano-clay additives in acidic media [Volume 3, Issue 3, 2019, Pages 157-165]
  • Geotechnical Investigating the Effect of Nanoclay Additives on the Geotechnical Properties of Clay and Silt Soil [Volume 3, Issue 2, 2019, Pages 63-74]
  • Ground settlement The effect of non-simultaneous excavation of closely-spaced twin tunnels on ground surface settlement [Volume 3, Issue 1, 2019, Pages 31-39]

H

  • Hybrid fibers Effect of Hybrid Fibers on Water absorption and Mechanical Strengths of Geopolymer Concrete based on Blast Furnace Slag [Volume 3, Issue 4, 2019, Pages 195-211]

I

  • Interactive Highway Safety Design Modeling of Road Accidents Using the Model of I Interactive Highway Safety Design (Case Study: Roads of Qazvin, Zanjan and Hamadan) [Volume 3, Issue 1, 2019, Pages 18-30]
  • Internal friction angle Investigating the Effect of Nanoclay Additives on the Geotechnical Properties of Clay and Silt Soil [Volume 3, Issue 2, 2019, Pages 63-74]

L

  • Leca Industrial shell In vitro evaluation of the effect of SP200 lubricant on compressive strength of lightweight concrete with Leca aggregate and Powdered silica [Volume 3, Issue 4, 2019, Pages 227-237]
  • Lightweight concrete Investigating durability behavior and compressive strength of lightweight concrete containing the nano silica and nano lime additives in the acid environment [Volume 3, Issue 2, 2019, Pages 103-111]
  • Liquefaction Use of shear wave velocity in evaluation of soil layer’s condition after liquefaction [Volume 3, Issue 3, 2019, Pages 113-130]

M

  • MATLAB software Modeling of Road Accidents Using the Model of I Interactive Highway Safety Design (Case Study: Roads of Qazvin, Zanjan and Hamadan) [Volume 3, Issue 1, 2019, Pages 18-30]
  • Metakaolin Application of SVM for investigation of factors affecting compressive strength and consistency of geopolymer concretes [Volume 3, Issue 2, 2019, Pages 95-101]

N

  • Nano-clay Evaluation of durability behavior of geopolymer concrete containing nano-silica and nano-clay additives in acidic media [Volume 3, Issue 3, 2019, Pages 157-165]
  • Nano Clay Investigating the Effect of Nanoclay Additives on the Geotechnical Properties of Clay and Silt Soil [Volume 3, Issue 2, 2019, Pages 63-74]
  • Nano lime Investigating durability behavior and compressive strength of lightweight concrete containing the nano silica and nano lime additives in the acid environment [Volume 3, Issue 2, 2019, Pages 103-111]
  • Nonlinear Analysis (NSP) Studying the buckling behavior of composite columns (CFST) by cyclic loading [Volume 3, Issue 4, 2019, Pages 213-226]
  • Numerical Model Reliability of T-stub pre-stressed connections using numerical model [Volume 3, Issue 1, 2019, Pages 1-17]

O

  • Optimum moisture content Investigating the Effect of Nanoclay Additives on the Geotechnical Properties of Clay and Silt Soil [Volume 3, Issue 2, 2019, Pages 63-74]

P

  • Parameters compressive Investigate Effect of the Parameters Compressive on Behavior of Concrete Filled Tubular Columns under Fire [Volume 3, Issue 3, 2019, Pages 131-142]
  • Pine Flat Investigation into the effect of bed stiffness on seismic performance of concrete gravity dam under far- and near-field earthquakes [Volume 3, Issue 1, 2019, Pages 40-52]
  • Polypropylene Fibers Effect of Using Different Fibers on Slab on Grades [Volume 3, Issue 2, 2019, Pages 86-94]
  • Powdered silica In vitro evaluation of the effect of SP200 lubricant on compressive strength of lightweight concrete with Leca aggregate and Powdered silica [Volume 3, Issue 4, 2019, Pages 227-237]
  • Pushover analysis Effect of opening location in the wall with corrugated steel plate using the pushover analysis [Volume 3, Issue 2, 2019, Pages 75-85]

R

  • Reliability Reliability of T-stub pre-stressed connections using numerical model [Volume 3, Issue 1, 2019, Pages 1-17]

S

  • Seismic Load Studying the buckling behavior of composite columns (CFST) by cyclic loading [Volume 3, Issue 4, 2019, Pages 213-226]
  • Settlement Use of shear wave velocity in evaluation of soil layer’s condition after liquefaction [Volume 3, Issue 3, 2019, Pages 113-130]
  • Steel Fibers Effect of Using Different Fibers on Slab on Grades [Volume 3, Issue 2, 2019, Pages 86-94]
  • Strength Effect of opening location in the wall with corrugated steel plate using the pushover analysis [Volume 3, Issue 2, 2019, Pages 75-85]
  • Strip foundation Probabilistic analysis of bearing capacity of strip foundations overlying reinforced embankments [Volume 3, Issue 3, 2019, Pages 167-179]
  • Structural lightweight concrete In vitro evaluation of the effect of SP200 lubricant on compressive strength of lightweight concrete with Leca aggregate and Powdered silica [Volume 3, Issue 4, 2019, Pages 227-237]
  • Sulfuric acid Investigating durability behavior and compressive strength of lightweight concrete containing the nano silica and nano lime additives in the acid environment [Volume 3, Issue 2, 2019, Pages 103-111]
  • Super lubricant In vitro evaluation of the effect of SP200 lubricant on compressive strength of lightweight concrete with Leca aggregate and Powdered silica [Volume 3, Issue 4, 2019, Pages 227-237]
  • SVM Application of SVM for investigation of factors affecting compressive strength and consistency of geopolymer concretes [Volume 3, Issue 2, 2019, Pages 95-101]

T

  • Thermal stabilization Effect of thermal stabilization of soil, bentonite, calcium carbonate and fibers on behavior properties of clay soil [Volume 3, Issue 1, 2019, Pages 53-62]
  • T-stub Reliability of T-stub pre-stressed connections using numerical model [Volume 3, Issue 1, 2019, Pages 1-17]