Guide for Authors

Authors’ contribution

This phrase often differs in level of aspect, and depends on the topical area of study. A statement of contribution make available validation for the order of authorship, and it also assigns proper credit for academic contributions to the reported results. This is especially important where large research teams or multiple divisions within a company are involved in collaborative research. Here you can find a sample of Authors’ contribution.

    Author X contributed in all trials, coordinated the data-analysis and contributed to the writing of the manuscript.

    Author Y is corresponded to the methods and experimental section.

    Author Z designed the research strategy and prepared the study

This step is necessary for Pendar Academy and Journal of Civil Engineering and Materials Application and you can find it in step 2 .

We provide this section online: step 2 (submit new manuscript-Pendar pub manuscript tracking system) The submitter author and corresponding author are responsible for any filled Authors’ contribution.

All authors should cleared their authorship before submission, there is hard limitation for any change (add or remove authors) in authorship after submission. We recommended you to using COPE authorship guideline:  http://publicationethics.org/files/u2/2003pdf12.pdf. Any change in authors’ affiliations is not included in limitation. If you have any question about authorship changes, you can directly contact to: info@jcema.com

 

Conflict of Interest

A conflict of interest (COI) is a condition in which a person or institute is involved in several benefits (financial, emotional, or otherwise), one of which could possibly corrupt the motivation of the individual or organization. The occurrence of a conflict of interest is independent of the occurrence of impropriety. In Pendar Pub, all authors of all types of journal manuscripts are required to show any financial interest in or arrangements with any company whose product was used in a study or is referred to in the paper or any other conditions that could have potentially biased the work reported its conclusions, suggestions, or opinion reports. These are included e.g. direct or indirect sources of fund(s) for the specific author(s) or for the related department(s) or organization(s), particular relationships, or direct academic opposition. If the manuscript is published, acknowledgment of all sources of funding and financial involvements related to work must be made in the paper, and whether the study was started and analyzed by the investigator or by the funding source must be divulged. At the end of the manuscript text "Conflict of Interest ", all authors must resolve any financial and personal relationships with other persons or organizations that could influence (bias) on their work. If there are not conflicts of interest, the authors should fill related check box in step 6 (submit new manuscript manuscript tracking system), "The authors declare that there are no conflicts of interest. Pendar pub Academy and Journal of Civil Engineering and Materials Application use the Conflict of Interest that Released and approved by the Committe of Publishing Ethics (Cope).  pendar pub Academy and Journal of Civil Engineering and Materials Application strongly recommend resolve it before submitting your manuscript. The submitter author and corresponding author are responsible for filling this section in step 6 .

 

Title page

Title page should contains Full author’s information (such as: first name, last name, Affiliation, email address and cleared who is corresponding author) orderly. Also full research title should be mentioned in title page. Title page is necessary for Pendar pub manuscript tracking system.

Manuscript highlights

Highlights are a several sentences of important points that convey the main results and provide readers with a rapid textual overview of the paper. These three to five important sentences describe the essence of the research (e.g. results or conclusions) and highlight what is distinctive about it. A sample of highlights is:

The goal of the work was design a biosensor by   using of catalase and Tio2  nanoparticles as modifier.

The  good  absorptivity  and  conductivity  of  Tio2    nanoparticles  significantly  enhanced  the electrochemical detecting. Biosensor displayed many advantages such as excellent catalytic activity and low detection limit. Provide Manuscript highlights are optional for pendar pub Academy and Journal of Civil Engineering and Materials Application.

Supplementary materials

Extra data about control or supplemental experiments, field sites, observations and hypotheses that bear directly on the arguments of a study defined as Supplementary. When a paper is published, the Supplementary Materials are linked from the main paper html page and will be clearly marked in Pendar Pub and Journal of Civil Engineering and Materials Application Online as Supplementary Materials. They can be cited through using the similar doi as the paper. Supplementary Materials should

be submitted at the same time the manuscript is first submitted (use the author submission portal through manuscript tracking system). Supplementary Materials are optional and usually not refereed, but the referees or editor may recommend changes, including removing some unnecessary Supplementary Materials or moving items from the main text to the Supplementary Materials. Supplementary Materials can be modified in accordance with these suggestions and resubmitted along with a revised manuscript in response to a round of refereeing. Once accepted for publication, Supplementary Materials cannot be altered unless reason is found to eliminate an item.

Graphical Abstract

The graphical abstract is considered a part of the procedural content of the paper, and it’s preparation is optional during the paper submission process. The Graphical Abstract must be a brief, illustrative reflection of the content of your paper. We recommended: image Specifications Dimensions: 1000x400 File Types: JPG, JPEG, TIFF, PNG, GIF, Word, PS, EPS, PPT and BMP Recommended File Size: less than 600 KB For image-only graphical abstracts, please label the file: graphical abstract.

 

Submission Criteria

 Submission Method

All submissions should submit through manuscript tracking system.

 Manuscript preparation

All manuscripts should be prepared according to below items:

 Content Font:

10 Times New Roman

 Line spacing

2 cm

Tables, figures and diagrams title font

Their fonts should be 10 Times New Roman BOLD

Tables’ provions

They should be Cleared, editable formats; the tables as images format is not acceptable.

Figures provions

They should be with High resolution, editable formats; the figures should have high quality.

Diagrams’ provions

They should be Cleared, editable formats. The Diagrams as images format are not acceptable.

Equations’ provions

They Should be cleared, editable formats; The Equations as images format are not acceptable. Equations should be drawn with software and numbered.

Location and citation of any table, figure, diagram and equation should be determined.

Subdivision - numbered sections

Manuscript should be divided into clearly defined and numbered sections. Subsections should be numbered as below: 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Any subsection may be given a short-term heading. Each heading should appear on its own separate line.

 

Manuscript important elements properties

Be care, your prepared manuscript should be without any authors’ information. Authors’ Information should be inserted in title page separately.

 Title

The title should be clear and coverage whole the study subject.

 Abstract

According to Pendar pub Academy strategy the abstract section is limited and should be between 150-250 words and also should be continues. Abstract should be summary of the study and prepared as original content; Extract abstract from manuscript sentences is not acceptable.

 Keywords

According to Pendar pub Academy strategy, Keywords are limited and should be between 3-5 words, also should be separated with comma and one space after comma with this template: Concrete, Nano Tio2, Tepmprature, xxxx.

 References

All references should be prepared according to  Vancouver style.

 

Reference Samples

Journal:

Arefian Z, Pishbin F, Negahdary M, Ajdary M. Potential toxic effects of Zirconia Oxide nanoparticles on liver and kidney factors. Biomedical Research. 2015;26(1):89-97.

 Journal:

Cornell BA, Braach-Maksvytis V, King L, Osman P, Raguse B, Wieczorek L, et al. A biosensor that uses ion-channel switches. Nature. 1997;387(6633):580-3.

 Journal:

Park M, Yi JW, Kim EM, Yoon IJ, Lee EH, Lee HY, et al. Triggering receptor expressed on myeloid cells 2 (TREM2) promotes

adipogenesis and diet-induced obesity. Diabetes. 2015 Jan;64(1):117-27.

 Conference:

Al-Kindi SG, Ali F, Farghaly A, Nathani M, Tafreshi R, editors. Towards real-time detection of myocardial infarction by digital

analysis of electrocardiograms. Biomedical Engineering (MECBME), 2011 1st Middle East Conference on; 2011: IEEE.

 Book:

Gouvea C. Biosensors for health applications: INTECH Open Access Publisher; 2011.

 Book:

Supriya A, Shruthi B, Kashyap B, Kumar G, Anand S. Pericoronal radiolucencies with significant pathology: Clinico-

histopathologic evaluation2015 March 1, 2015. 148-52 p.

Other section of manuscript should be prepared exactly and according to international criteria, to find more information please visits:  Bates College.

 

Manuscript Status Check & Acceptance validation

One of other professional services provided by Pendar pub Academy is  Manuscript Status Check. This service provides latest status of any submitted manuscripts on time. This service is usable for all authors, also validation status of any submitted manuscript provided for authors’ institute. To use of this service, you need manuscript ID and submission date.  Academic institute & universities staffs can easily check validation of any offered acceptance by this system. If you have any question about this service, you are free to contact us through: info@Jcema.com.

 

License to use

Creative Commons copyright licenses tools give license information to everyone from individual creators to large companies and institutions (A simple and standardized way to grant copyright permissions to their creative work). Journal of Civil Engineering and Materials Application is licensed under a Creative Commons Attribution 4.0 International License.

 

Copyright

JCEMA allow authors to retain the copyright of their papers without restrictions. Authors will then grant the publisher the right of first publication, and other non-exclusive publishing rights.

 

 

Publish Fee

Journal of Civil Engineering and Materials Application is an open access journal. There is not any publish fee for Journal of Civil Engineering and Materials Application Duration (June-December) 2024.

 

Pendar Academy (Journal of Civil Engineering and Materials Application)