Author Index

A

  • Abbasi Dezfouli, Abdolkarim Effect of Using Different Fibers on Slab on Grades [Volume 3, Issue 2, 2019, Pages 86-94]
  • Ahmadi Maleki, Mojtaba Application of SVM for investigation of factors affecting compressive strength and consistency of geopolymer concretes [Volume 3, Issue 2, 2019, Pages 95-101]
  • Ameri, Mahmoud Modeling of Road Accidents Using the Model of I Interactive Highway Safety Design (Case Study: Roads of Qazvin, Zanjan and Hamadan) [Volume 3, Issue 1, 2019, Pages 18-30]
  • Asadi, Fatemeh Sadat Effect of opening location in the wall with corrugated steel plate using the pushover analysis [Volume 3, Issue 2, 2019, Pages 75-85]

B

  • Bagherzadehkhalkhali, Ahad Investigation into the effect of bed stiffness on seismic performance of concrete gravity dam under far- and near-field earthquakes [Volume 3, Issue 1, 2019, Pages 40-52]
  • Bagherzadeh Khalkhali, Ahad Investigating the Effect of Nanoclay Additives on the Geotechnical Properties of Clay and Silt Soil [Volume 3, Issue 2, 2019, Pages 63-74]
  • Bagherzadeh Khalkhali, Ahad Use of shear wave velocity in evaluation of soil layer’s condition after liquefaction [Volume 3, Issue 3, 2019, Pages 113-130]
  • Barati, Maryam Seismic behavior of steel-concrete composite columns under cyclic lateral loading [Volume 3, Issue 4, 2019, Pages 181-194]
  • Bayat, Shayan Probabilistic analysis of bearing capacity of strip foundations overlying reinforced embankments [Volume 3, Issue 3, 2019, Pages 167-179]
  • Behnamnia, Alireza Seismic behavior of steel-concrete composite columns under cyclic lateral loading [Volume 3, Issue 4, 2019, Pages 181-194]
  • Beiranvand, Peyman Investigate Effect of the Parameters Compressive on Behavior of Concrete Filled Tubular Columns under Fire [Volume 3, Issue 3, 2019, Pages 131-142]

E

  • Emami, Mohammad Application of SVM for investigation of factors affecting compressive strength and consistency of geopolymer concretes [Volume 3, Issue 2, 2019, Pages 95-101]
  • Esparham, Alireza Effect of Hybrid Fibers on Water absorption and Mechanical Strengths of Geopolymer Concrete based on Blast Furnace Slag [Volume 3, Issue 4, 2019, Pages 195-211]

G

  • Ghaedian Rronizi, Davood In vitro evaluation of the effect of SP200 lubricant on compressive strength of lightweight concrete with Leca aggregate and Powdered silica [Volume 3, Issue 4, 2019, Pages 227-237]
  • Guo, Zuhua Evaluation of durability behavior of geopolymer concrete containing nano-silica and nano-clay additives in acidic media [Volume 3, Issue 3, 2019, Pages 157-165]

H

  • Haseli, Behzad Evaluation of seismic Behavior of Bridges Under Effect of Abutment Modelling [Volume 3, Issue 3, 2019, Pages 143-156]
  • Hashemi, Mehdi Effect of thermal stabilization of soil, bentonite, calcium carbonate and fibers on behavior properties of clay soil [Volume 3, Issue 1, 2019, Pages 53-62]
  • Hoseini Toodashki, Vahid The effect of non-simultaneous excavation of closely-spaced twin tunnels on ground surface settlement [Volume 3, Issue 1, 2019, Pages 31-39]

J

  • Jafarkazemi, Mahyar Reliability of T-stub pre-stressed connections using numerical model [Volume 3, Issue 1, 2019, Pages 1-17]
  • Jafarkazemi, Mahyar Investigating durability behavior and compressive strength of lightweight concrete containing the nano silica and nano lime additives in the acid environment [Volume 3, Issue 2, 2019, Pages 103-111]
  • Jamshidi Avanaki, Mohammad Effect of Hybrid Fibers on Water absorption and Mechanical Strengths of Geopolymer Concrete based on Blast Furnace Slag [Volume 3, Issue 4, 2019, Pages 195-211]

K

  • Kaviani, Ali Effect of thermal stabilization of soil, bentonite, calcium carbonate and fibers on behavior properties of clay soil [Volume 3, Issue 1, 2019, Pages 53-62]
  • Khanahmadloo, Ehsan The effect of non-simultaneous excavation of closely-spaced twin tunnels on ground surface settlement [Volume 3, Issue 1, 2019, Pages 31-39]

M

  • Mahboubi, Behnam Evaluation of durability behavior of geopolymer concrete containing nano-silica and nano-clay additives in acidic media [Volume 3, Issue 3, 2019, Pages 157-165]
  • Mohammadi, Neda In vitro evaluation of the effect of SP200 lubricant on compressive strength of lightweight concrete with Leca aggregate and Powdered silica [Volume 3, Issue 4, 2019, Pages 227-237]
  • Mohammadi Farsani, Arash Effect of opening location in the wall with corrugated steel plate using the pushover analysis [Volume 3, Issue 2, 2019, Pages 75-85]
  • Moradikhou, Amir Bahador Effect of Hybrid Fibers on Water absorption and Mechanical Strengths of Geopolymer Concrete based on Blast Furnace Slag [Volume 3, Issue 4, 2019, Pages 195-211]
  • Moradpour, Ahmad Investigate Effect of the Parameters Compressive on Behavior of Concrete Filled Tubular Columns under Fire [Volume 3, Issue 3, 2019, Pages 131-142]
  • Mousavi Davoudi, Seyed Ali Studying the buckling behavior of composite columns (CFST) by cyclic loading [Volume 3, Issue 4, 2019, Pages 213-226]

N

  • Naghipour, Morteza Studying the buckling behavior of composite columns (CFST) by cyclic loading [Volume 3, Issue 4, 2019, Pages 213-226]
  • Naseri, Farzad Investigation into the effect of bed stiffness on seismic performance of concrete gravity dam under far- and near-field earthquakes [Volume 3, Issue 1, 2019, Pages 40-52]
  • Nemati, Armin Reliability of T-stub pre-stressed connections using numerical model [Volume 3, Issue 1, 2019, Pages 1-17]

O

  • Omidinasab, Fereydoon Investigate Effect of the Parameters Compressive on Behavior of Concrete Filled Tubular Columns under Fire [Volume 3, Issue 3, 2019, Pages 131-142]
  • Orak, Milad Effect of Using Different Fibers on Slab on Grades [Volume 3, Issue 2, 2019, Pages 86-94]
  • Oshnavieh, Delara Use of shear wave velocity in evaluation of soil layer’s condition after liquefaction [Volume 3, Issue 3, 2019, Pages 113-130]

R

  • Rahimi Manbar, Habib Investigating the Effect of Nanoclay Additives on the Geotechnical Properties of Clay and Silt Soil [Volume 3, Issue 2, 2019, Pages 63-74]

S

  • Safarzadeh, Iman Investigating the Effect of Nanoclay Additives on the Geotechnical Properties of Clay and Silt Soil [Volume 3, Issue 2, 2019, Pages 63-74]
  • Sanaeirad, Ali Probabilistic analysis of bearing capacity of strip foundations overlying reinforced embankments [Volume 3, Issue 3, 2019, Pages 167-179]
  • Sekhavati, Pejman Investigating durability behavior and compressive strength of lightweight concrete containing the nano silica and nano lime additives in the acid environment [Volume 3, Issue 2, 2019, Pages 103-111]
  • Shamsashtiany, Reza Modeling of Road Accidents Using the Model of I Interactive Highway Safety Design (Case Study: Roads of Qazvin, Zanjan and Hamadan) [Volume 3, Issue 1, 2019, Pages 18-30]
  • Sharifi, Yaser An Analysis of the Shear Strength and Rupture Modulus of Polyolefin-Fiber Reinforced Concrete at Different Temperatures [Volume 3, Issue 4, 2019, Pages 238-254]

V

  • Vahidi, Mahnaz Effect of thermal stabilization of soil, bentonite, calcium carbonate and fibers on behavior properties of clay soil [Volume 3, Issue 1, 2019, Pages 53-62]

W

  • Wu, Hao Evaluation of durability behavior of geopolymer concrete containing nano-silica and nano-clay additives in acidic media [Volume 3, Issue 3, 2019, Pages 157-165]

Y

  • Yousefvand, Moslem An Analysis of the Shear Strength and Rupture Modulus of Polyolefin-Fiber Reinforced Concrete at Different Temperatures [Volume 3, Issue 4, 2019, Pages 238-254]
  • Yousefvand, Saeed An Analysis of the Shear Strength and Rupture Modulus of Polyolefin-Fiber Reinforced Concrete at Different Temperatures [Volume 3, Issue 4, 2019, Pages 238-254]